Pyro Magic products
 |
 |
 |
PROFESSIONAL STANDARD FIRING SYSTEM Model: SFS-150A - Also available in 30, 90 & 300 position systems This manually fired system has a 150 firing positions. It's reduced size lends itself more to the average aerial display, even though it has fewer firing positions, it still has the same 'fire-power' capability of the larger systems. The SFS-150A is also smaller physically in size and weight. This professional system includes all of the special features of the larger systems. |
 |
PERFECT FOR STAGE AND SPECIAL EFFECT PYROTECHNICS! The NEW Model: SFS-30SE |
 |
DOUBLE AERIAL SPLITTER BOX ASSEMBLY Model: SBA-02A Model: SBA-02 (PT,50',100') Divides one 30 position distribution line so that two distribution slats may be fired simultaneously. This helps to spread out finales or pre-set special effect shells. Also available as a three-way splitter. Normally supplied with 10 inch pigtail. |
 |
CABLE TEST FIXTURE This Unit Contains internal batteries for cable testing. With test option feature the LCT-101 tester may also be used to test shell hookups at slat. Operator can easily locate open squibs before the show. |
 |
PORTABLE POWER PACK This portable power pack contains two 6.5 amp hour batteries and a microprocessor controlled recharging system. Three LEDs give a visual indication of the state-of-charge (when placed in the charging mode) for the internal battery pack. Other Models Include: * Model: DC24AS DC Only (with 6.5 AHr batteries) * Model: DC24AS-HD DC Only (with 17.5 AHr batteries) * Model: DC24A, AC/DC (with 6.5 AHr batteries) * Model: DC24A-HD, AC/DC (with 17.5 AHr batteries) |
 |
SPECIAL DISTRIBUTION NETWORKS Pyro Magic now has special distribution strips (slats) and slave boxes, that are directly compatible with the 'Fire One' computer system and the 'Smart Fire'® computer system by Pyromate. Now you can have the versatility of computer firing, and the ruggedness of the Pyro Magic distribution strips (slats). Each strip has 32 positions, with Red and Black quick-release PyroClips. Strips are available in 8ft., 12ft., 16ft. and 24ft. lengths. Strips may be plugged directly into the output of the decoder module for maximum fire power, or short extension cables may be purchased so that the decoders are away from the fallout area, or may be covered for rain protection. Models Include: * Model: SDS-8C $215.00 ea * Model: SDS-12C $230.00 ea. * Model: SDS-16C $245.00 ea. * Model: SDS-24C $270.00 ea. |
|
TEN POSITION DISTRIBUTION SLATS These slats are compatible with Bases/Delcor Systems. Available in 3ft., 5ft. and 8ft. lengths. * Model: SDS-3B $69.00 ea. * Model: SDS-5B $79.00 ea. * Model: SDS-8B $89.00 ea. |
|
DISTRIBUTION SLATS FOR PYROMATE FM-45
Distribution slats to supplement Pyromate FM-45 distribution modules. All aluminum slats are available in 16ft. or 24ft. lengths. Outputs protected with heavy duty 6 amp diodes. * Model: SDS-PM45 $359.00 ea. |
|
SPECIAL ADAPTER CABLE Three ten position connectors plug into the rear of the Bases / Delcor panel outputs and feed directly into Pyro Magic's distribution slats. Cables are nominally 25ft, but may be ordered in shorter or longer lengths. * Model: SFS-BASES 25' $60.00 * Model: SFS-BASES 125' $115.00 |
|
WINGNUT DRIVER This handy gadget will save many hours of time and cut fingers in the assembly and disassembly of mortar box hardware that utilizes threaded rods and wingnuts. A hollow tube, machined to fit the contour of most 3/8 inch wingnuts, will quickly tighten rods up to 7/16 inch diameter. Designed to fit any portable as well as electric drill motors with 3/8-inch chuck. They are available in 7 inch and 10 inch lengths. * Model: WD-7 * Model: WD-10 |
|
DISTRIBUTION SLATS
8', 16' and 24' Thirty-two positions. These all aluminum slats are designed to directly interface with the fire one systems. Input leads have been lengthened to 10 inches so that they may be connected directly to the decoder modules. (Short cables may be ordered separately should it not be practical to plug directly into slat) * Model: SDS-8 * Model: SDS-16 * Model: SDS-24 |
|
AIRBURST MIXER ADAPTER This adapter assembly allows you to move sequentially down the panel while mixing the locations on a distribution slat. The use of a 16 ' or 24 ' slat for indoor airbursts (and falls) will greatly reduce setup time. The slat can be preloaded at stage level and then "flown" to a predetermined height. Two slats, a modelSBA102 Splitter Box Assembly and the model ABM101 Mixer can cover a total distance of 48 ' (or 32feet if using the 16 foot slats) of stage area. * Model: ABM01 |
WANT TO GO WIRELESS? HOLATRON SYSTEMS have radio systems that interface with PyroMagic's Distribution Networks.